The system adopts a dual-workstation operation, with one workhead simultaneously pouring the casting (pouring station) and the other simultaneously removing the part for mold cooling (water tank station), rotating 180 degrees. The drive utilizes a servo motor and reducer, and the water tank station is equipped with a material receiving mechanism.
Robotic pouring and manual pouring are both options.
Technical Parameters
●Maximum mold diameter: Φ500mm
●Maximum mold weight: 150kg
●Maximum mold base plate spacing: 450mm
●Minimum mold base plate spacing: 180mm
●Mold opening/closing stroke: 270mm
●Side gating angle range: 0-88 degrees
● Pouring Angle Range --------------------------------- 0-110 degrees
● Equipment Rotation Diameter ----------------------------- Φ3540mm
● Receiving Plate Rotation Radius --------------------------- R950mm
● Hydraulic Pump Station Working Pressure ----------------------------- 40-50kg/cm²
● Hydraulic Station Motor Power ------------------------------ 3.75kw
● Mixing Motor ------------------------------------- 0.75kw*2
● Servo Motor ---------------------- ---------------2.0kW
●Three-phase power supply-------------------------------------380V/15A/50Hz
●Oil phase volume-------------------------------------245L
●Hydraulic station cooler (water-cooled)-------------------------160L
●Water tank volume-------------------------------------720L
●Maximum equipment dimensions-----------------------------3928mm*2000mm*2220mm
●Net weight of equipment approx.-----------------------------------3700kg