Specifications

1. Device: PLC control.

2. Operation: Hydraulic system transmission (one hydraulic master pump system can control 3 casting machines), hydraulic master pump power 11KW; equipped with a water cooler system, system oil temperature detection, liquid level detection, return oil negative pressure detection, and cooler inlet water temperature detection.

3. Casting functions: 1. Pour casting, 2. Stationary casting, 3. Inclined casting, 4. Inclined part removal, 5. Inclined stationary casting.

4. Mold closing and mold opening start; mold opening has a deceleration system, deceleration distance and stroke are adjustable.

5. Inclined casting angle: 0-90 degrees can be set at any angle; rotation horizontally and tilted angles have a two-way braking deceleration system.

6. Part removal angle: Two options: horizontal 0 degrees and tilted 90 degrees; upper mold part removal.

(When the mold opens, the lower mold starts ejecting synchronously, and the workpiece is brought to the upper mold synchronously with the upper mold before being removed).

7. Mold Cooling and Heating: Two-way air cooling, four-way water cooling, two-way heating (12KW heating power), can be set in stages and time periods. (Mold connection devices and parts are to be supplied by the customer).

8. Mold Fixing Base Dimensions: 800*600*75mm (5 slots on the pressure plate)

9. Maximum Mold Weight: 800kg at 85 degrees Celsius.

10. Maximum Mold Closing Stroke: 500mm.

11. Maximum Spacing Between the Two Sides of the Mold Fixing Plate: 850mm.

12. Minimum Spacing Between the Two Sides of the Mold Fixing Plate: 350mm.

13. Minimum Distance Between the Front of the Two Guide Pillars: 890mm; Minimum Distance Between the Sides: 400mm.

14. Mold Closing Force: 6300kg (Mold Closing Cylinder uses heavy oil hydraulic cylinder).

15. Extrusion Cylinder: Adjustable by 50mm.

16. Extrusion Method: Ejector rod method.

17. Neutron (Core Pulling): Four channels that can operate independently, sequentially, or simultaneously (the hydraulic cylinder connecting to the mold is to be provided by the customer).

18. Hydraulic Master Pump Tank Capacity: 480L.

19. Working Oil Pressure: 35-45kg/cm².

20. Curing Time: Adjustable.

21. Casting process time can be displayed.

22. Mold temperature can be set with upper and lower limits. When the mold temperature exceeds the upper or lower limit, the mold cannot be closed to proceed to the next cycle. Alternatively, the operation can be selected to be independent of mold temperature control.

23. Equipped with a mold water cooling pipeline system, consisting of four channels, independently controlled, displaying flow and pressure, with time-sharing and segmented settings. When water supply stops, the water inside the mold is automatically blown out. (The water inlet and outlet and the water pipes connecting to the mold are to be provided by the customer).

24. Equipment Net Weight: Approximately 5000kg.

25. Machine dimensions: 2549mm*2354mm*2090mm (usable space).